F.A.Q
Frequently asked questions
– Value for money
– Ease of maintenance
– Small joint surface
– Contemporary.
We have a color chart to match the concrete product.
In residential applications, the choice is usually a shade of grey.
Our specialty is white!
Concrete is a hard but also porous material. To reduce its resistance to the negative impact of aggressive products, the surface can be treated.
Waxing :
– Gives a shiny effect
– Fills the pores of the concrete floor
– Must be treated regularly
– Offers little protection against stains
Impregnation :
– Choice of matte or satin effect
– Crystallizes the top layer of the floor
– offers very good protection
A concrete floor was originally designed for industrial
industrial applications. Residential use is no problem.
We recommend that you use our
maintenance products.
The use of these products extends the life of your concrete and optimizes the wear resistance of the concrete floor.
Without proper maintenance, we can give no warranty.
We can carry out the preparatory work ourselves
ourselves, enabling us to offer you a complete package.
We recommend a 1% slope (1cm per square metre) for water drainage.
Immediately after completion, sawing is carried out to reduce the risk of cracking, although this cannot be guaranteed at 100%.
As an option, certain techniques can be used to reduce the risk of cracking:
-Increasing the amount of reinforcement
-Use of profiles
-Local reinforcement
-In the unlikely event of a crack appearing, we will repair it free of charge.
Despite its thinness (5 to 6 mm), waxed concrete is highly resistant to wear. This is due not only to the use of quartz aggregates, but also to the use of a two-component finish.
Provided the substrate is stable, waxed concrete can be applied to any type of material, such as wood, metal, granite, tiles and so on.
Working time is generally one week, depending on the size of the surface to be treated.
We can tell the difference between a depth of 3 mm and 1 cm.
Despite its thinness (5 to 6 mm), concrete is highly resistant to wear. This is due not only to the use of quartz aggregates, but also to the application of a two-component finish.
Residential concrete is not comparable to industrial concrete.
Differences :
Floor flatness :
Standard tolerance: 9 mm / 2 m
Our tolerance: 4.5 mm / 2 m
Edge finish:
Standard tolerance: 12 mm / 2 m
Our tolerance: 4.5 mm / 2 m
